Harga: Rp. 27.800.000 / 1
Water Quality Multi Parameter TSS Meter Indonesia With Built-in Type-C, Bluetooth, and WiFi
-
-
Merk: AI SO I SE
-
Minimal Pembelian: 1 1
-
Pembelian Maksimal: 1 1
-
Pengiriman: 3 hari sejak pembayaran
-
Lokasi: DKI Jakarta - Jakarta Barat
-
Dilihat: 17 Kali
-
Pembaruan: 09-01-2025 18:47
Portable Water Quality Multi Parameter
Model : BI YC-7200 Series
Up to : 30 Parameter
( COD , Manganese COD, Ammonia nitrogen ,Total Phosphorus ,Total , Nitrogen , Turbidity , Suspended solids (SS) , Chroma , Hexavalent Chromium , chromium , copper , nickel , Zinc , silver , iron , antimony , Phosphate , Sulfate , Sulfide , Cyanide m, Fluoride , Nitrate , nitrogen , Nitrite , Residual Chlorine , Total Chlorine , Chlorine dioxide , Silicon dioxide , Volatile , phenol , manganese , aniline )
List of all parameters
Measurement items Measuring range (mg/L) Detection limit Measurement Standards
COD 0-15000 5 HJ/T 399-2007
Manganese COD 0-10 0.1 GB/T 11892-1989
Ammonia nitrogen 0-50 0.05 HJ535-2009
Total Phosphorus 0-20 0.02 GB/T 11893-1989
Total Nitrogen 0-100 0.5 Alkaline potassium persulfate oxidation method
Turbidity 0-1000NTU 0.5 GB/T 13200-1991
Suspended solids (SS) 0-500 5 GB/T 11901-1989
Chroma 0-500 degrees 5 GB/T 11903-1989
Hexavalent Chromium 0-5 0.01 GB/T 7467-1987
chromium 0-5 0.01 GB/T 7466-1987
copper 0-50 0.05 GB/T 7731.3-2008
nickel 0-4 0.1 GB/T 11910-1989
Zinc 0-15 0.05 Xylenol Orange Method (EPA approved method)
silver 0-1 0.05 HJ 489—2009
iron 0-50 0.01 HJ/T 345─ 2007
antimony 0-10 0.5 SL 92-1994
Phosphate 0-20 0.02 GB/T 11893-1989
Sulfate 0-200 5 HJ/T342-2007
Sulfide 0-4 0.01 GB/T 16489-1996
Cyanide 0-1 0.004 HJ/T 27-1999
Fluoride 0-10 0.02 HJ 488-2009
Nitrate nitrogen 0-20 0.5 Chromotropic acid spectrophotometry (EPA approved method)
Nitrite 0-1 0.002 GB/T 7493-1987
Residual Chlorine 0-10 0.1 HJ 586-2010
Total Chlorine 0-10 0.1 HJ586-2010
Chlorine dioxide 0-10 0.05 DPD spectrophotometry
Silicon dioxide 0-5 0.1 HZ-HJ-SZ-0148
Volatile phenol 0-10 0.1 HJ 503-2009
manganese 0-5 0.04 HJT 344-2007
aniline 0-2 0.02 GB/T 11889-1989
Technical indicators
Measurement error ≤±5%
Repeatability ≤±3%
Wavelength accuracy ±1nm
Optical stability ≤±0.001A/20 minutes (100,000 hours life)
Colorimetric method Tube colorimetric 16mm/25mm
Wavelength selection Automatic selection according to measurement items
Wavelength calibration Automatic calibration
Detection light source imported solid-state cold light source
Data Display Concentration, transmittance (%), absorbance (A)
operating system Water Quality Intelligent Detection System
Data Transfer USB (Type C), wifi, Bluetooth
Data Printing Bluetooth thermal printer (optional)
Data processing 50,000 data points, 200 curves (including self-expansion)
Display Industrial grade 3.0 inch color
Work Environment 5-45℃; ≤50% without condensation
Power supply mode 12V3A
Supply voltage 5V=2.5A
Instrument quality 500g; 230*90*90 (mm)
Product Overview
Portable multi-parameter rapid water quality tester is developed based on the national testing standards (GB) and the Ministry of Environment testing standards (HJ). It is a portable rapid water quality testing instrument developed based on the operating habits of Chinese people and the concept of simpler and more accurate testing for front-line testing personnel. The instrument uses an industrial-grade 3.0-inch high-definition screen, with intuitive data, compact design, and easy to carry. It is the best choice for on-site testing; the power supply uses a 5000 mAh rechargeable large-capacity lithium battery with a standby time of up to 3 months.
Application Areas
Portable multi-parameter rapid water quality tester is widely used in environmental monitoring, environmental protection management, outdoor scientific research, river monitoring, ecological survey, aquaculture and other water quality rapid testing fields.
-It supports the determination of COD, ammonia nitrogen, total phosphorus, total nitrogen, turbidity, and suspended solids, and can be upgraded to more than 30 detection indicators.
-The instrument is small, packed in a whole box, light, easy to carry, and suitable for rapid mobile testing.
-The independently developed intelligent water quality detection system can be easily operated without the need for professional personnel.
-Guide the operation steps to avoid operating errors; truly make testing easier!
-3.0-inch industrial high-definition display screen, intelligent guided UI design, clear operation and more testing fun.
-The instrument can be equipped with an optional Bluetooth printer, which can directly print test data or batch print historical data.
-Built-in WIFI connection function, can view and print test data in real time and historical test data.
-Built-in Type-C, Bluetooth, and WiFi data connection functions can be linked to the data acquisition system for data editing and saving.
-Dual colorimetric detection device, supports tube colorimetry of 16mm/25mm at the same time, making the detection items more extensive.
-A more environmentally friendly and efficient testing method; compared with competitors, it saves 30% of reagents, making the testing cost lower.
-Faster reagent use; more than 95% of factory reagents are liquid reagents and can be used directly; safe and ac
Model : BI YC-7200 Series
Up to : 30 Parameter
( COD , Manganese COD, Ammonia nitrogen ,Total Phosphorus ,Total , Nitrogen , Turbidity , Suspended solids (SS) , Chroma , Hexavalent Chromium , chromium , copper , nickel , Zinc , silver , iron , antimony , Phosphate , Sulfate , Sulfide , Cyanide m, Fluoride , Nitrate , nitrogen , Nitrite , Residual Chlorine , Total Chlorine , Chlorine dioxide , Silicon dioxide , Volatile , phenol , manganese , aniline )
List of all parameters
Measurement items Measuring range (mg/L) Detection limit Measurement Standards
COD 0-15000 5 HJ/T 399-2007
Manganese COD 0-10 0.1 GB/T 11892-1989
Ammonia nitrogen 0-50 0.05 HJ535-2009
Total Phosphorus 0-20 0.02 GB/T 11893-1989
Total Nitrogen 0-100 0.5 Alkaline potassium persulfate oxidation method
Turbidity 0-1000NTU 0.5 GB/T 13200-1991
Suspended solids (SS) 0-500 5 GB/T 11901-1989
Chroma 0-500 degrees 5 GB/T 11903-1989
Hexavalent Chromium 0-5 0.01 GB/T 7467-1987
chromium 0-5 0.01 GB/T 7466-1987
copper 0-50 0.05 GB/T 7731.3-2008
nickel 0-4 0.1 GB/T 11910-1989
Zinc 0-15 0.05 Xylenol Orange Method (EPA approved method)
silver 0-1 0.05 HJ 489—2009
iron 0-50 0.01 HJ/T 345─ 2007
antimony 0-10 0.5 SL 92-1994
Phosphate 0-20 0.02 GB/T 11893-1989
Sulfate 0-200 5 HJ/T342-2007
Sulfide 0-4 0.01 GB/T 16489-1996
Cyanide 0-1 0.004 HJ/T 27-1999
Fluoride 0-10 0.02 HJ 488-2009
Nitrate nitrogen 0-20 0.5 Chromotropic acid spectrophotometry (EPA approved method)
Nitrite 0-1 0.002 GB/T 7493-1987
Residual Chlorine 0-10 0.1 HJ 586-2010
Total Chlorine 0-10 0.1 HJ586-2010
Chlorine dioxide 0-10 0.05 DPD spectrophotometry
Silicon dioxide 0-5 0.1 HZ-HJ-SZ-0148
Volatile phenol 0-10 0.1 HJ 503-2009
manganese 0-5 0.04 HJT 344-2007
aniline 0-2 0.02 GB/T 11889-1989
Technical indicators
Measurement error ≤±5%
Repeatability ≤±3%
Wavelength accuracy ±1nm
Optical stability ≤±0.001A/20 minutes (100,000 hours life)
Colorimetric method Tube colorimetric 16mm/25mm
Wavelength selection Automatic selection according to measurement items
Wavelength calibration Automatic calibration
Detection light source imported solid-state cold light source
Data Display Concentration, transmittance (%), absorbance (A)
operating system Water Quality Intelligent Detection System
Data Transfer USB (Type C), wifi, Bluetooth
Data Printing Bluetooth thermal printer (optional)
Data processing 50,000 data points, 200 curves (including self-expansion)
Display Industrial grade 3.0 inch color
Work Environment 5-45℃; ≤50% without condensation
Power supply mode 12V3A
Supply voltage 5V=2.5A
Instrument quality 500g; 230*90*90 (mm)
Product Overview
Portable multi-parameter rapid water quality tester is developed based on the national testing standards (GB) and the Ministry of Environment testing standards (HJ). It is a portable rapid water quality testing instrument developed based on the operating habits of Chinese people and the concept of simpler and more accurate testing for front-line testing personnel. The instrument uses an industrial-grade 3.0-inch high-definition screen, with intuitive data, compact design, and easy to carry. It is the best choice for on-site testing; the power supply uses a 5000 mAh rechargeable large-capacity lithium battery with a standby time of up to 3 months.
Application Areas
Portable multi-parameter rapid water quality tester is widely used in environmental monitoring, environmental protection management, outdoor scientific research, river monitoring, ecological survey, aquaculture and other water quality rapid testing fields.
-It supports the determination of COD, ammonia nitrogen, total phosphorus, total nitrogen, turbidity, and suspended solids, and can be upgraded to more than 30 detection indicators.
-The instrument is small, packed in a whole box, light, easy to carry, and suitable for rapid mobile testing.
-The independently developed intelligent water quality detection system can be easily operated without the need for professional personnel.
-Guide the operation steps to avoid operating errors; truly make testing easier!
-3.0-inch industrial high-definition display screen, intelligent guided UI design, clear operation and more testing fun.
-The instrument can be equipped with an optional Bluetooth printer, which can directly print test data or batch print historical data.
-Built-in WIFI connection function, can view and print test data in real time and historical test data.
-Built-in Type-C, Bluetooth, and WiFi data connection functions can be linked to the data acquisition system for data editing and saving.
-Dual colorimetric detection device, supports tube colorimetry of 16mm/25mm at the same time, making the detection items more extensive.
-A more environmentally friendly and efficient testing method; compared with competitors, it saves 30% of reagents, making the testing cost lower.
-Faster reagent use; more than 95% of factory reagents are liquid reagents and can be used directly; safe and ac