BINTANG INSTRUMENT : HP /WA :  081362449440 , eMail : b081362449440@yahoo.com ( Mr Jonathan )

Portable Octane / Cetane Analyzer
Type : SX-150
Brand : Shatox
Origin : Rusia 

SHATOX SX-150

The SX-150 analyzer is designed for testing fuel quality. It is a portable small-sized device intended for rapid analysis of oil products quality in field and laboratory conditions.

It is an upgraded generation of fuel analyzers that superseded SX-200 and was designed on the basis of SX-300 analyzer.

SX-150 has additional modes for determining gasoline oxidation breakdown time and kerosene percentage in diesel fuel.

The device can be used together with a PC or a laptop through a USB interface. SX-150 supports the automatic computer-based calibration. Measurement results, including the analysis date and time, can be saved in the instrument memory and transferred to the PC (in .xlsx or .txt format).

SX-150 has an 8-key antiglare keyboard, which is easy for operation, wear-proof and resistant to aggressive environments. 

The software for the instrument can be downloaded from the manufacturer’s website www.shatox.com in Download section.

Operating conditions: air temperature range from -10°С up to +45°С.

The device is powered from 4 elements of АА type (R6) or from a computer USB port.
 

Instrument capabilities:

• Gasoline octane level in compliance with ASTM D 2699-86, ASTM D 2700-86.
• Diesel fuel cetane level in compliance with ASTM D 4737-03, ASTM D 613, EN ISO 5165.
• Diesel fuel type and сold filter plugging point (СFPP) (reference parameter).
• Kerosene percentage in diesel fuel (reference parameter).
• Gasoline breakdown time (oxidation stability) (reference parameter).

Parameter description	Measurement units	Value
Range of measured gasoline octane level	ON	40–135
Acceptable limit of octane number measurement basic error, max	ON	± 0.5
Limit of acceptable difference between parallel octane number measurements, max	ON	± 0.2
Petrol oxidation breakdown time measurement range	min.	50-2400
Acceptable basic error limit of petrol oxidation breakdown time	min.	10
Range of measured cetane level	CN	20–100
Acceptable basic error limit of cetane numbers, max	CN	±1.0
Acceptable difference limit between cetane numbers parallel measurements, max	CN	± 0.5
Acceptable error limit when determining СFPP	C o	± 5
Kerosene content determination range in diesel fuels	%	0-95
Acceptable basic error limit when determining kerosene content in diesel fuels	%	3
Measurement time	sec	1–5
Insufficient power supply indication operation threshold	V	5.4
Instrument useful life	Years, minimum	6
Overall dimensions of:
electronic module	mm	211x100x45
sensor #1	mm	60х100
Instrument mass with a sensor	gr	680

.
.
.
..
.
.